AffiSecure Forum

Yes, Vivint supports Z-Wave devices, but compatibility can vary. I’ve had luck with Yale smart locks and Leviton dimmers, but some off-brand plugs did...

Open the Vivint app, go to the main menu, and tap “Custom Actions.” From there, you can create rules like “When door opens → turn on living room light...

Unfortunately, no. Vivint cameras are locked into their ecosystem and don’t support RTSP or ONVIF. I tried sniffing the traffic, and the stream is enc...

I had the same issue! It turned out my router’s 5GHz band was causing conflicts. ADT panels prefer 2.4GHz for better range and compatibility. Try sett...

Yes, ADT supports Z-Wave, but only through certain versions of their Command & Control panel. I’ve personally added a Schlage Z-Wave lock and some...

In the ADT Control app, go to the menu and select "Automation" → then tap "Add New Rule." You can set a trigger (like "motion detected") and an action...

Yeah, this is a common issue. First, make sure you're using Advanced Motion Detection and not the basic one. Also, position the camera so motion moves...

Unfortunately, no. Ring cameras are completely cloud-based and don’t support RTSP, ONVIF, or any kind of local video streaming. You’re locked into usi...

I had the same problem with my Ring Doorbell 3. A few tricks helped: Adjust the Motion Zone so it excludes the street completely, even if that m...

Buffering can occur due to weak Wi-Fi signal or bandwidth issues. Ensure the camera is placed within range of your router and that the internet speed ...

If the camera shows as "offline," check the Wi-Fi connection and confirm that it’s still connected to your network. You can try restarting both your r...

To watch your Eufy camera remotely, simply open the Eufy Security app, where you should see a live feed of your camera as long as it’s connected to Wi...

Ensure you're connecting the Eufy camera to a 2.4GHz network, as it doesn’t support 5GHz. Double-check that your Wi-Fi password is entered correctly a...